Monday, February 20, 2012

Tutorial for Fabric Envelopes for the Envelope System Wallet

I have received so many questions involving a pattern for the Envelope System Wallet, especially concerning the fabric envelopes.  I thought for a long while that I would make a pdf pattern and sell it in my Etsy Shop.  But as time went on, I realized that the main point of the Envelope Budgeting System was saving money.  So here is my 100% free fabric envelope tutorial!

Step 1: Cut out 2 rectangles of fabric that measure 7 3/4 inches by 8 inches.
 Step 2: Fold one of the rectangles in half length-wise (it should measure 3 7/8 inches by 8 inches). Pin the sides. If you are using two different fabrics, this will be your outer fabric.
 Step 3:  Sew a half inch seam along each side (top remains open).
 Step 4: Trim the edges to 1/4 inch and cut off the corners.  This will reduce bulk and make your envelope look much more professional and neat.
 Step 5:  Repeat steps 2 through 4 EXCEPT on one side seam, leave about 2 to 1 1/2 inches open at the folded edge.  It is difficult to see in the picture below, but my fingers are marking my open area.  This fabric will be your lining if you are using two different fabrics.
 Step 6:  Turn the out fabric right side out. Push out the corners and iron well.  Place the outer fabric inside the lining so that right sides are facing each other.
 Step 7: Line up the side seams and pin.  Match up the raw edges along the top and pin also.

 Step 8: Sew a 1/2 inch seam all around the top edge.  Be sure to back stitch where you start and stop sewing.
 Step 9: Trim top edge to 1/4 inch from seam.
 Step 10: Reach through the opening in the lining and pull the envelope all the way through.

 Step 11:  Fold the raw edges of your opening inward and pin.

 Step 12:  You can opt to do two things here.  The most professionally thing to do is to slip stitch the opening closed.  If small stitches are used, someone could almost never find your opening.  If you are making this for your self, you can simply use your machine to stitch very close to the edge of the fabric.
 Step 13: Push the lining into the outer fabric and iron.
 Many people has asked how well the money fits into the envelope.  Well, here it is.  There is a good 1/2 inch on either side of the money and almost an inch at the top.  I have never had a problem with my money slipping out so I do not put a closure on my envelopes unless a customer requests one.  You can always add a small square of velcro to the top if you choose.
My hope is that this tutorial is easy to understand and useful to a great many! May you always have money in your envelope!

9 comments:

The Cottage Market {Andrea} ♥ said...

i LOVE this little tutorial! they are precious! thank you so much for sharing : ) hugs...your newest follower!

Iron Girl!! said...

Hello! I found your lovely blog via New Nostalgia. Love this project! I'll be making one for my cash and perhaps one for my coupons! Thank you for sharing with us!

Jen @ frazzled 5 said...

You make sewing look sew easy! I am still so afraid of it:( Following you back!!
~Jen @ hutchinsonherd.blogspot.com

Unknown said...

This is sew adorable.. and you make it look soo easy with your wonderful tutorial! Thanks so much for sharing with the Pink Hippo Party.. can't wait to see what you share next so I am your newest follower!

Nay said...

thanks for stopping by my blog! i love this project! it's so cute! :)

Michaela @ coveredinmodpodge.blogspot.com said...

We keep talking about going to the envelop system. This would make it so cute and fun. Thanks for the tutorial!

Unknown said...

This post is interesting. I will share this with my friends and other members. Thanks for sharing this post with us. Kindly keep posting more things.
slitheriounblocked.net slitherioprivateservers.com Clickerheroes2.co

Sophie Grace said...

I merely would like to give you a enormous thumbs up with the excellent info you might have here within this post. I am returning to your blog for additional soon. 192.168.l.l is an IP address used by many routers and modems as the default gateway

vijay said...



This configuration can also be used for devices like Router, Modem etc. and they are all having the initial IP address

192.168.10.1

192.168.1.254

192.168.0.1